I got the first batch of yellow zinc back and I like it!
I am also prepping for the final assembly of the rolling chassis and drive train. I am waiting on my ubolt brackets and shackles to come back from powder.
I got a buddy coming over on 1/17 to help with the assembly. Here's hoping the rest of the required hardware and parts will be here in time!
Here's hoping 2020 will see the 40 back on the road!
Popular posts from this blog
Build it up, test, tear it down, rinse and repeat a million times! I am in that phase of test-fitting all things I want to fit together, tearing it back down to make adjustments, and then doing it all over again. It is time-consuming but necessary. I got the interior mostly together just to find out that the transfer case linkage designed for a later model FJ40 doesn't play nice with the earlier model transmission tunnel cover. So I had to cut a hole in the freshly painted floor! The seats, column, wheel, and shifters all work well together though. I do have to bend the transmission shifter a bit toward the passenger side so I can get it into reverse without displacing my leg in the seat. The pieces of floorboard removed to clearance the shift linkage I'll be refurbishing my wheel to match the brown vinyl on the seats and have new brown clamshells for the column. I plan to use black marine carpet to cover the floorboards and transmission tunnel and the massive fuel tank will co
The Tub & Body Panels Made it Home It has been a long time coming, but the tub and most of the panels are home! I'm still waiting on the tailgate and doors to be completed, and I might do late-style doors instead of my early-style ones. This is because the vent windows won't be usable with the cage and the window frames are pretty bad. We'll see. I had to bolt something on, so I installed the fuel filler and cap. LOTS more to come!
I got most of the cooling system installed. I am waiting on more of the "proper" belt clamps and the radiator will go in last. I also got the Sniper bolted on. The A/C and alternator brackets are being powder coated now, but I test-fitted them first. That alternator is a test unit from Premier Power Welder. I am waiting for the water pump and crank pulley to come back from the powder coater so I can test for belt alignment. We also got the fenders and aprons bolted on and I couldn't resist a chance to see the hood up there too.